Click to print

Prices:

custom sizes no extra charge banner

Click Here to Return to Photo and Art Mounting & Lamination page Print Complete Table Print Complete Table Normal Service: 2 -4 working days except for Acrylic (7 days) Faster service quoted on request. Note: In the unlikely event of damage during mounting, laminating or other finishing service, Reed Art and Imaging is not liable to replace or reimburse any print or mounting substrate not purchased through us. Due to the variances in inkjet print medias, a 20% surcharge will be applied to all inkjet prints supplied to us (not produced by Reed Art and Imaging) for mounting, laminating or other finishing services.

Miscellaneous Mounting Add-ons

To Get Access Click Login or Register.

Float Frames (a frame on the back with a french cleat for hanging)

Normal Service: 2 additional working days  A few inches smaller than the finished presentation and added to the backside of your mounted print allowing the print to stand proud of the wall. Price includes mated wall cleat for a ready to hang presentation

ContemporaryReverseWithZBarDSC_8631Metal Float Frame:

This box style frame is mounted to the back of your substrate with a margin, allowing the presentation too look as if it’s floating away from the wall. French Cleat is included. Shown affixed to the backside of Aluminum Sheet.

To Get Access Click Login or Register.

imageComingSoonMDF Float Frame with Cleat

This box style frame is mounted to the back of your substrate with a margin, allowing the presentation too look as if it’s floating away from the wall. French Cleat is included.

To Get Access Click Login or Register.

imageComingSoonKomatex Float Frame with Cleat

This box style frame is mounted to the back of your substrate with a margin, allowing the presentation too look as if it’s floating away from the wall. French Cleat is included.

To Get Access Click Login or Register.

Face Mount to Acrylic Plex

Plex requires special edge treatments and special ordering. Please allow: 7 additional business days for Satin Edges. Enhances your image with a perceived increase in visual “snap”. The viewer sees higher contrast, increased detail and color separation.

 
  

To Get Access Click Login or Register.

Photo Mount to Aluminum Sheet

Aluminum Sheet

Normal Service: 4 working days Faster service quoted on request. Aluminum sheet is ideal for glossy prints or lams.

To Get Access Click Login or Register.

Photo Mount to Aluminum CompositeAlumaPanel

Normal Service: 4 working days Faster service quoted on request. Aluminum sheet bonded over a poly core. Smooth, durable and archival. White AlumaPanel is ideal for glossy prints or lams. The brushed aluminum , called a “Butler Finish”, is perfect for spot mount presentations.

 

To Get Access Click Login or Register.

imageComingSoonIllustration Board or Adhesive Only

Normal Service: 4 working days. Faster service quoted on request. Basic matte board like material. Semi-smooth and white only. To reduce the orange peel effect from mounting high gloss prints, please mount glossy prints and lams on Plex or AlumaPanel.

To Get Access Click Login or Register.

FormCornerHalfInchBlackGator

 

Foam Core and Gator Board Sheet

Normal Service: 4 working days Faster service quoted on request. Foam Core or Komatex products products can warp over time. We cannot guarantee or warranty these products against warping. If you are seeking a long term product that is stable against warping, we recommend Plex, AlumaPanel, or MDF with properly sized box frame cleats. To reduce the orange peel effect from mounting high gloss prints, please mount glossy prints and lams on Plex or AlumaPanel.

To Get Access Click Login or Register.

HDF Hardboard Sheet

Normal Service: 4 working days Faster service quoted on request. Pre-consumer recycled product. Also available in flame resistant version – call for quote. To reduce the orange peel effect from mounting high gloss prints, please mount glossy prints and lams on Plex or AlumaPanel.

To Get Access Click Login or Register.

FormCornerhalfInchMDF2MDF Sheet

Normal Service: 4 working days Faster service quoted on request. Pre-consumer recycled product. Also available in flame resistant version – call for quote. To reduce the orange peel effect from mounting high gloss prints, please mount glossy prints and lams on Plex or AlumaPanel.

To Get Access Click Login or Register.

FormCornerHalfInchKomatexKomatex Expanded Poly Sheet

Normal Service: 4 working days Faster service quoted on request. To reduce the orange peel effect from mounting high gloss prints, please mount glossy prints and lams on Plex or AlumaPanel. Foam Core or Komatex products products can warp over time. We cannot guarantee or warranty these products against warping. If you are seeking a long term product that is stable against warping, we recommend Plex, AlumaPanel, or MDF with properly sized box frame cleats.

To Get Access Click Login or Register.

imageComingSoonLaminates

Normal Service: 4 working days if ordering Laminate only. No additional time if ordered with a mounting substrate. Faster service quoted on request.

To Get Access Click Login or Register.

Have a Question?

We get it - sometimes you just need a more personal touch, or maybe the info you're looking for is being elusive. That's perfect! Because we really do want to connect with you in a way that can meet your needs and expectations. We are primed and ready to answer your questions so you can get on to other things.

 
While You're Here, Sign Up for Our eNewsletter: "Seeing Things"
We'll never share your information with third parties.

Please know that we can monitor and respond during our regular business hours: M-F 8:30 am to 5:30 pm Mountain time.

 
This captcha form is case sensitive.
captcha